Select country / language
Doorbell
Camera
Sensor
Lighting
Smart plug
Smart power strip
Smart switch
Gateway
Splitter
Switch
Converter
Adapter
Extractor
Extender
Headphones
Receiver
Transmitter
€79,99
Free delivery
Free delivery in EU/UK and Australia from €100/ €250/ AU$200
Customer service
Available from
09:00 - 17:00 (UTC +1) Monday to Friday
Easy returns
Easy return procedure
The BoomBoom 100 is a Bluetooth receiver and Bluetooth transmitter in one. Stream music from a smartphone, tablet or PC to an audio system (RX mode), or stream audio from a TV to Bluetooth headphones (TX mode). Simply switch from reception to transmission mode using the switch. The BoomBoom 100 has both analogue and digital connections and supports aptX, aptX Low Latency and AAC.
At Marmitek you pay safely, quickly and easily online
The BoomBoom 100 is a Bluetooth audio transmitter (sender) and receiver in one.
In receiver mode (RX), it enables you to stream CD-quality music from your smartphone, PC or tablet to your audio system, while in transmitter mode (TX), it wirelessly streams audio from, for example, your TV to your Bluetooth headphones. If you want to switch from receiver (RX) to transmitter (TX) mode, just flick a switch on the BoomBoom 100.
The BoomBoom 100 has both analogue and digital connections and supports aptX, aptX Low Latency and AAC. If your smartphone or tablet also features aptX (Android) or AAC (iOS), it will enable wireless streaming in CD-quality (RX).
To take advantage of aptX Low Latency while streaming audio from your TV to Bluetooth headphones (TX), the latter must also be equipped with aptX Low Latency.
You may use, for example, the BoomBoom 577 for this. Lip sync issues will only be avoided if both the transmitter and receiver are equipped with aptX Low Latency. This means there will be no noticeable lag between the image seen on TV and the accompanying audio.
The BoomBoom 100 has the great additional feature of being able to transmit the sound from, for example, your TV to two headsets simultaneously.
Bluetooth
|
|
| Bluetooth supported profiles | A2DP |
| Bluetooth version | V 4.1, class 2 |
| Supported codec | aptX Low Latency, aptX, AAC (RX) and SBC |
| Range | Up to 10 metres with class 2 receiver/trasnmitter, up to 15 metres with class 1 receiver/transmitter |
| Audio delay | aptX Low Latency 32 ~ 40 ms, aptX 60 ~ 80 ms, AAC 90 ~ 150 ms, SBC 170 ~ 270 ms |
| Pairing memory | Up to 8 devices |
| Multipair | Up to 2 devices simultaneously |
Audio
|
|
| Audio frequency range | 20 Hz ~ 48 kHz (± 3 dB) |
Connections
|
|
| Interface audio input | 3.5 mm jack, Toslink digital stereo |
| Interface audio output | 3.5 mm jack, Toslink digital stereo |
General |
|
| Dimensions (h x w x d) | 20 x 105 x 25 mm |
| Weight | 25 grams |
| Ambient temperature | -10 °C ~ +55 °C |
| Storage temperature | -20 °C ~ +60 °C |
| Power supply | 100-240 VAC 50/60 Hz, 5 VDC micro USB adapter (included) or via micro USB cable (included) |
| Idle power consumption | < 0.2 W |
No, you cannot use the BoomBoom 100 to transmit and receive at the same time. On the BoomBoom 100 is a handy switch with which you can easily switch to TX or RX mode.
Yes, the BoomBoom 100 has aptX Low Latency. Only if both the transmitter and receiver have aptX Low Latency® lip sync problems will be prevented. This means that you do not see any noticeable difference between the image you see on TV and the sound that goes with it.
Make sure that the:
Please, ensure that
Please, ensure that :
Please ensure that the TX/RX switch is in the correct position.
Bluetooth is a digital wireless signal and you can expect some delay due to, for example, the required encryption/decoding and compression/decompression steps. The aptX and aptX Low Latency audio codecs supported by the BoomBoom 100 ensure a much smaller delay compared to regular Bluetooth audio. AptX Low Latency is not even noticeable (<40ms). Use the BoomBoom 100 with a pair of headphones that supports aptX or aptX Low Latency such as the BoomBoom 577.
Some modern TVs and receivers also have an audio delay option. To minimise delay, please ensure that the audio delay is set to 0.
To achieve the most low-noise audio possible, set the volume on your audio source to the highest possible level. Then adjust the volume to the desired level on your headphones.
Please ensure that you are within range of your Bluetooth device.
Bluetooth devices are susceptible to interference from other Bluetooth devices, cordless phones, routers, microwaves and wireless devices operating on the 2.4 GHz band. Please eliminate as many potential sources of interference as possible while using your Bluetooth headphones/speakers.
In TX mode: check the volume on both your Bluetooth headphones and your TV, as both may be able to adjust the volume.
In RX mode: check the volume of your smartphone and the app you are using. Also check the volume of your audio system.
Please use a USB adapter to power the BoomBoom 100, or use your TV&'ss Toslink connector. In your TV's settings, please ensure that Toslink is set to PCM Stereo.
SBC (Low Complexity Subband Coding) enables you to wirelessly listen to audio with reasonable sound quality. SBC is the standard method to send audio via Bluetooth.
The aptX® audio compression solution retains the full integrity of original digital audio and is optimised for instant real-time audio streaming. The suite of algorithms has earned a reputation for some of the highest audio quality, extremely low latency and strong resilience to bit errors, and has been proven in wireless, broadcast and professional live performance applications. The best result is achieved when playing lossless audio files (eg FLAC). Using MP3, you get the best results if the Bitrate is 256kbps or higher.
AptX Low Latency ensures a very short audio delay of less than 40 ms. With a regular Bluetooth connection, this is more than 100 ms. Both the transmitter and the receiver must have aptX Low Latency to be able to use this feature. With the BoomBoom 55, 77 and 100, the LED lights up green to indicate an aptX Low Latency connection.
AAC (Advanced Audio Coding) - AAC is supported by iOS devices. Apple implements AAC via Bluetooth at about 250 kbps.
*with a minimum purchase of €50,-
Subscribe now to our newsletter and stay informed
of the latest news and products.
