€34,99
Free delivery
Free delivery in EU/UK and Australia from €100/ €250/ AU$200
Customer service
Available from
09:00 - 17:00 (UTC +1) Monday to Friday
Easy returns
Easy return procedure
With this IR extender, you can operate up to two audiovisual devices inside a closed cabinet, using your own remote control. The Invisible Control 2 consists of an IR module including an IR receiver and 2 IR emitter LEDs. You stick an emitter LED on each device you want to operate. This enables you to operate up to 2 devices inside a closed cabinet, using your own remote control. The IR module is a small box that you place in the line of sight.
At Marmitek you pay safely, quickly and easily online
The Invisible Control 2 is an entry-level infrared extender that allows you to operate up to 2 audio visual devices.
You place the receiver (a little black box) within your remote control's line of sight, having it connected to the transmitter(s) you stuck to your audio visual devices. Your remote control's signal is sent to the transmitter(s) via the receiver. The transmitter then 'operates' your audio visual equipment. This ensures that you do not have to open any cabinet doors in order to operate your equipment.
| IR module incl. IR receiver |
|
| Frequency range | 30 - 60 kHz |
| IR reception range | ± 8 metres |
| IR reception angle | 60° (+30°/-30° from centre) |
| IR LED connection | 2x 3.5 mm jack socket (mono) for emitter LEDs |
| Dimensions (h x w x d) | 30 x 90 x 75 mm |
| Power | 100-240 VAC 50/60 Hz, 12 VDC adapter |
| IR emitter |
|
| IR emitter (stick-on) LEDs | 300 cm (from plug to split 200 cm, from split to LED 100 cm) with 3.5 mm jack plug |
The IR LED is made of a material which lets the infrared light through. You can place the LED in the centre of the eye without any problems.
No, that is not a good idea. The signal becomes too weak. The warranty also expires.
Do not remove any of the IR LEDs. You can, however, attach the unused IR LED to the bottom or back of the device.
The Invisible Control 2 is equipped with two transmitter LEDs, for a maximum of two devices, but can be extended by adding another cable with two transmitter LEDs (IR Eye 2, 08174), so that you can control four devices via IR.
No, when you are using the mains, you do not need a battery. The Invisible Control Black 2 will also not go on stand-by.
The Invisible Control 2 must not be allowed to react to the light emitted by the screen. It's easy to test whether or not this is the case. The Invisible Control has 'blinking' LEDs that flash on and off when transmitting. If you hold the Invisible Control in front of the screen, the LEDs will flash red. If you take the Invisible Control away from the screen, the LEDs will switch off. Once the LEDs are off, you have found the correct position to prevent interference.
Subscribe now to our newsletter and stay informed
of the latest news and products.
Select country / language
Doorbell
Camera
Sensor
Lighting
Smart plug
Smart power strip
Smart switch
Gateway
Splitter
Switch
Converter
Adapter
Extractor
Extender
Headphones
Receiver
Transmitter
