Transmit your decoder's signal over existing network cables to another location in the home.
- Watch your HD content elsewhere on your TV.
- Watch films, look at photographs from your media center PC, Blu-ray player, game console, set top box or hard-disk recorder on a different TV/projection screen in perfect HD quality.
- Wired signal transmission up to 60 metres.
- Optimum price/quality ratio as a result of using CAT5e/CAT6 cabling.
- Retention of Full HD 1080p image and sound quality for up to 30 metres.
The MegaView 60 enables you to send the signal from an HDMI device, such as your decoder, to another room in your home. You use the UTP cables (network cables) that are already in your home for this. The advantage of extending your HDMI signal over UTP in combination with a product from our Mega View series is that you can overcome great distances with minimum quality loss.
The MegaView 60 consists of one HDMI transmitter and one HDMI receiver. This enables you to extend the signal of a decoder for up to 30 metres over 2 Cat 5e/6 cables. You use an HDMI cable to connect the decoder to the MegaView transmitter, and another HDMI cable to connect the MegaView receiver to your (2nd) TV. The MegaView transmitter and receiver are connected through 2 UTP cables.
This is our most cost-effective alternative to extending HDMI over UTP.
Points of sale
Find Our Store
Find Our Store
Frequently asked questions
Bad (or no) image and sound.
- Check if the A/V device is switched on.
- Use only CAT5e/CAT6 cable as specified in the manual CAT5e Cable Requirements).
- Check if the CAT5e/CAT6 cable provides a solid connection (no cable faults).
- Check if the RJ-45 has been connected according to the EIA/TIA T568B standard.
- Ensure that the maximum cable length is not exceeded.
- Install your system as far away from any RF sources (wireless devices) as possible.
- Set a low resolution on your HDMI source. The CAT5e/6 cable used probably cannot deal with the higher resolution bandwidth.
No (or poor) image and sound.
- Check if the power adapter is connected and plugged into the mains.
- Only use High Speed HDMI® certified cables for the best picture and sound quality.
- Do not use HDMI cables that are longer than specified in the technical data.
- Both the HDMI source and your screen have to support HDMI fully.
- Check whether your HDMI sources, DVI device and screen support the copy protection HDCP (High-bandwidth Digital Content Protection).
WE ARE HERE TO HELP YOU!
If you have any questions about our products or our services, do not hesitate to contact our customer service. Our employees are ready to help you and answer your questions.