Always included
-
HDMI transmitter
-
HDMI receiver
-
HDMI cable | 150 cm
-
IR extension cable with 3 LEDs | 140 cm
-
Remote control | Batteries included
-
USB power adapter | 150 cm
Out of stock
1080p Full HD Wireless
Range - Single Floor
Plug & play, no software
Currently not in stock
Product description
Watch TV at a 2nd location in the home, without laying (additional) cables.
- Replace your HDMI cable by a wireless connection, allowing you to place your TV or projector anywhere you want.
- Mount the receiver (out of sight) behind your TV or on the ceiling next to your projector. No more visible cables.
- Watch up to 2 (HD) devices such as Blu-ray players, digital video recorders (DVRs), HD set-top boxes, PS3 or Xbox game consoles elsewhere in your home and easily switch between the sources connected without changing plugs.
- Suitable for Full HD 1080p and all 3D formats.
- The built-in HDMI splitter means that you can also connect a TV to the transmitter so that you can continue to watch the connected devices locally.
- Operate your AV sources from anywhere, even through a wall or cupboard door, using the infrared receiver.
- The HD signal does not experience any delays and is therefore perfect for game consoles.
- Sends the HD signal uncompressed.
- Single floor solution.
- 100% HDCP compliant.
The GigaView 821 enables you to wirelessly transmit the signal from a digital TV decoder, media player and/or Blu-ray player. This means you no longer need an additional connection or a decoder/media player for a 2nd TV to watch digital TV in HD quality. Also, when you have a connection downstairs and you want to place your primary TV further away from the connection than what is desirable in terms of cabling, this is a perfect solution.
The GigaView 821 is particularly suitable if you want to play games on a big screen and if both Full HD and 3D are important for an optimal gaming experience. Because the HDMI signal is not compressed, there will be no delay, leaving your response speed unchanged. However, you can also easily hide away this product, making it an ideal solution for placing it near your ceiling projector/beamer. The range is large enough when you want to send signals to devices in the same or an adjacent room.
The product above transmits a copy of the signal to the other room, enabling you to watch the same programme or film at both places. For example, you can continue to watch a film in the bedroom that you started downstairs. If you want to be able to watch other TV channels in the other room, you can connect a 2nd decoder to be able to watch independently of each other.
The GigaView 821 is particularly suitable if you want to play games on a big screen and if both Full HD and 3D are important for an optimal gaming experience. Because the HDMI signal is not compressed, there will be no delay, leaving your response speed unchanged. However, you can also easily hide away this product, making it an ideal solution for placing it near your ceiling projector/beamer. The range is large enough when you want to transmit signals to devices in the same or an adjacent room.
Technical specifications
Reseñas
Points of sale
Frequently asked questions
Can I remove one of the IR (infrared) LEDs if I don’t use it?
Can I extend the cable with the IR (infrared) LEDs?
Can I place the IR LED in the centre of the infrared eye?
No sound and image.
- It may take up to 80 seconds before sound and image start functioning when starting up the transmitter and receiver.
- Ensure that the HDMI cables used are connected properly and that they are not defective.
- Select the right HDMI input on your HDTV or HD Projector; consult your user manual if necessary.
- Check whether the audio output from your HD device is set to HDMI.
The POWER LED continues to flash blue.
- Ensure that the transmitter and receiver are located within the maximum range. The range will be affected if the device, for example, is located in a cabinet. Try to install the transmitter and receiver at a shorter distance.
- Try setting another transmission frequency (channel) via the receiver.
The CHANNEL LED continues to flash blue.
- The LED flashes 1x per second and the screen of the HDTV or HD Projector shows 'Not supported Format'.
- Try setting another screen resolution on your HD device as this may not be supported. See technical data for the supported video resolutions.
- The LED flashes 3x per second and the screen of the HDTV or HD Projector shows 'No signal'.
- Ensure that the HDMI cables used are connected properly and that they are not defective.
Need help?
NEED HELP?
WE ARE HERE TO HELP YOU!
If you have any questions about our products or our services, do not hesitate to contact our customer service. Our employees are ready to help you and answer your questions.
