
Speaker Anywhere 650
Wireless speakers connection (formerly Surround Anywhere 221)
High Resolution Audio
Built-in amplifier
Volume follows AV receiver volume setting
€ 149,99
Product description
Make the speakers of your home cinema set wireless.
- Send the sound from your AV receiver or amplifier wirelessly to your surround speakers.
- Expand audio to multiple rooms (max. 3) in your home (multiroom).
- Digital audio technology for interference-free transmission and CD-quality sound.
- Transmitter and receiver are uniquely linked, so that you can use several sets in the same room (max. 6).
- Automatic volume control by the AV receiver or amplifier, and/or local control on the receiver.
- Volume control on the receiver ensures proper balance between front and rear speakers.
No more messy cables in your room; with the Speaker Anywhere 650 you can wirelessly connect the (rear) speakers of your home cinema set.
Technical specifications
Connections
Interface audio output
Speaker connection, 4-16 Ohm
General
Dimensions (h x w x d)
35 x 155 x 110 mm (receiver), 30 x 120 x 82 mm (transmitter)
Weight
100 grams (receiver), 200 grams (transmitter)
Ambient temperature
0 ~ + 50°C
Storage Temperature
-20 °C to +70 °C
Pairing
Secure ID Pairing
Idle Power Consumption
<0.5 W (Transmitter) < 2.5 W (Receiver)
Receiver
Output Power
2 x 50 W (2 x 25 W RMS)
Frequency Response
20 Hz - 20 kHz @ 8 Ohm
Signal to Noise Ratio
80 dB (Transmitter/Receiver A-weighted)
Total Harmonic deviation
< 0.5% @ 1 W
Audio Total Delay
≤ 20 ms
Power Efficiency
78%
Channel Separation
≥ 50 dB
Power Supply
100-240 VAC 50/60 Hz, 18 VDC adapter
Trasnmitter
Audio transfer method
Digital
Transmitter frequency
2.4 GHz
Operating range
Up to 30 meters free field and up to 10 meters through walls and ceilings
Connection to the receiver
Digital
Data transfer speed
2 kbps, bi-directional, full duplex
Power supply
100-240 VA 50/60 Hz, 5V DC adapter
Downloads
Reviews
What customers say
Frequently asked questions
-
Can I connect an additional receiver?
Yes, you can connect a total of 3 receivers. -
No audio at receiver side.
- Check that the blue LED is lit continuously.
- Adjust the receiver's volume control.
- Does the rear surround speaker have a signal?
-
Audio is distorted or too low.
- Adjust the volume control of the surround set until no more clipping occurs.
- Adjust the volume control of the receiver until no more clipping occurs.
-
I still have a Surround Anywhere 221, can I also connect an extra receiver (SA650 RX) to it?
No, unfortunately it is not possible to connect an extra receiver (SA650 RX) to a Surround Anywhere 221.
Can't figure it out?
Related products
- Choosing a selection results in a full page refresh.
- Opens in a new window.