Always included
-
HDMI transmitter
-
HDMI receiver
-
IR emitter cable | 150 cm
-
IR receiver cable | 150 cm
-
Power adapter
In stock
€ 99,99
This HDMI over UTP extender enables you to extend the 1080p 60Hz signal from an HDMI source over 1 CAT 5e/6 cable. You can extend the signal from a TV decoder up to 70 metres to a TV or beamer at a location of your choice, such as a classroom. Or hide your HDMI equipment in a meter cupboard and hang a TV completely free. Control the connected decoder remotely using the infrared return function. This set is also equipped with EDID, loopthrough & PoC.
Full HD
Extension to 70m
IR return function
Couldn't load pickup availability
MegaView 67 Pro
€ 99,99
Product description
Extend a Full HD HDMI signal over UTP
- Extend a Full HD video signal up to 70 metres over a single CAT5e/6 cable.
- Supports up to 1080p video resolution without compression.
- Supports High Definition LPCM 7.1 CH, Dolby TrueHD and DTS-HD Master Audio.
- Operate AV equipment remotely using the integrated IR return channel.
- HDMI loopthrough outputs a copy of the AV signal to feed a local display or projector.
- Built-in Power over Cable (PoC) for use of a single power adapter (transmitter).
Technical specifications
General
Ambient temperature
+0 to +40 °C
Humidity
20% to 90%
Power supply
100-240 VAC 50/60 Hz, 12 VDC adapter
Power consumption
2.73W
Audio
Audio Formats
DTS-HD Master Audio, Dolby TrueHD, Dolby Digital/AC3, LPCM7.1 and PCM 2.0CH
Translation missing: en.products.product.tech_specs.ir receiver
Frequency range
20-60 kHz
Infrared reception range
8 meters
Cable length
150 cm
Receiver
Input
1x CAT5e/6, 1x IR in
Output
1x HDMI
CAT 5e/6 Cable Length
70m@1080p
Dimensions (H x W x D)
79.5 x 69 x 16.5mm
Weight
130 grams
Trasnmitter
Input
1x HDMI
Output
1x HDMI, 1x IR out, 1x CAT5e/6
Dimensions (H x W x D)
79.5 x 69 x 16.5 mm
Weight
132 grams
Video
Video Resolution
1080p (Full HD), 1080i, 720p, 576p, 480p
HDMI Standard
HDMI 1.4, EDID, HDCP 1.4, DVI
Color Formats
RGB and YCbCr 4:4:4
Data- transfer
TMDS
Video Bandwidth
10.2 Gbps
Reseñas
Points of sale
Frequently asked questions
No (or poor) image and sound
If you experience poor or no picture after connecting the MegaView 67 Pro UHD, try detecting the problem by connecting the devices to your TV or projector one at a time. This enables you to determine whether the problem is in the HDMI sources, the HDMI cables, the MegaView 67 Pro or the TV.
- Make sure the power adapter is connected and plugged in.
- For the best picture and sound quality, only use High Speed HDMI® certified cables.
- Do not use HDMI cables longer than those specified in the technical data.
- Check the HDMI cables and/or connectors for damage.
- Both the HDMI source and your TV or projector should fully support HDMI.
- Check that your HDMI sources and TV or projector support HDCP 2.2 (High Bandwidth Digital Content Protection) copy protection.
How do I connect the cables?
- Please check that the HDMI source is switched on.
- Make sure that the CAT5e/CAT6 cable is connected well (no breakages).
- Make sure the RJ-45 is connected according to the EIA/TIA T568B standard.
- Make sure that the maximum cable length is not exceeded.
- Prevent installing your system close to RF sources (wireless devices) as much as possible.
- Set your HDMI source to a lower resolution, the CAT5e/6 cable used may not be able to handle the bandwidth of higher resolutions.
The IR return function is not working
- Ensure that the IR LED is properly plugged in.
- Experiment with the location of the IR receiver and IR led cable.
- The IR receiver has a reception sensitivity of max. 8 metres.
- The range is also dependent on the remote control used.
Need help?
NEED HELP?
WE ARE HERE TO HELP YOU!
If you have any questions about our products or our services, do not hesitate to contact our customer service. Our employees are ready to help you and answer your questions.
