GigaView 811

GigaView 811
HDMI extender wireless - Full HD - 3D
Skip to product information
1 of 14

Always included

  • HDMI transmitter

  • HDMI receiver

  • HDMI cable | 150 cm

  • Mini USB to USB cable | 100 cm

  • Power adapter | 150 cm

  • User manual

GigaView 811
GigaView 811
HDMI extender wireless - Full HD - 3D

Out of stock

€ 299,99
€ 0,00 € 299,99
(incl. VAT)
Title
Wireless HDMI forwarding? With this HDMI extender, you can wirelessly connect a laptop to a beamer without having to install any software. This GigaView 811 sends the signal from a laptop (or other HDMI device) wirelessly via the transmitter to the receiver of the set that you connect to a beamer. The HDMI signal is transmitted digitally and without compression. As a result, the image and sound experience no delay or loss of quality. The range is sufficiently large if you want to send signals to a TV or beamer in the same room.

1080p Full HD Wireless

Range - Single Room

Plug & play, no software

Currently not in stock

View full details
GigaView 811 - HDMI extender wireless - Full HD - 3D
GigaView 811
€ 299,99
EU

Product description

Extend your HDMI cable wirelessly

  • Replace your HDMI cable and create a wireless connection between the laptop and TV or projector.
  • Mount the receiver (invisibly) behind your TV or on the ceiling next to your projector.
  • Also suitable for wireless transmission of HDMI image from devices such as Blu-ray players, Digital Video Recorders (DVRs) or HD set-top boxes.
  • Turn your PC or laptop into a media center watch films, look at photographs, watch internet TV, YouTube or check e-mails wirelessly on your TV.
  • No installation of software is necessary and it is quick and easy to use.
  • Suitable for Full HD 1080p and all 3D formats.
  • No loss of image or sound quality as the HD signal is being transmitted without compression.
  • 100% HDCP compliant.

The GigaView 811 enables you to wirelessly connect a laptop to a projector/beamer without the need to install software. Ideal for use in a meeting room or a classroom. All you need is a projector with an HDMI input, a laptop with an HDMI output and this GigaView 811.

The GigaView 811 transmits the signal of the laptop (or another HDMI device) wirelessly to the receiver that is connected to a projector/beamer. The GigaView 811 is Full HD and supports all 3D formats. Because the signal is transmitted digitally and without compression, the image and sound do no experience any delay or loss of quality.



Technical specifications

General
Ambient Temperature 0 ~ 40 °C
Humidity 10% ~ 85%
Power Supply 100-240 VAC 50/60 Hz, 5 VDC Adapter
Audio
Audio formats Dolby Digital/AC3, DTS 5.1 and PCM stereo
Receiver
Output 1x HDMI
Dimensions (h x w x d) 32 x 95 x 95 mm
Weight 126 grams
Technology
Operating Frequency 5.1 - 5.6 GHz
Operating Range Up to 10 meters LOS (line of sight) and up to 5 meters through walls.
Latency None (< 1ms)
Video compression Visual Lossless Compression (VLC)
Trasnmitter
AV input 1x HDMI
Dimensions (h x w x d) 18 x 30 x 83 mm
Weight 22 grams
Video
Video Resolutions 1080p@60/50 Hz, 1080i, 720p, 576p, 480p
PC Resolutions Max. 1920 x 1200
HDMI Standards HDMI, DVI, EDID and HDCP 1.3
3D Formats 080p @23.98/24 Hz, 720p@59.94/60/50 Hz

Reviews

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Points of sale

Frequently asked questions

No sound and image.

  • It may take up to 80 seconds before sound and image start functioning when starting up the transmitter and receiver.
  • Ensure that the HDMI cables used are connected properly and that they are not defective.
  • Select the right HDMI input on your HDTV or HD Projector; consult your user manual if necessary.

The POWER LED continues to flash blue.

  • Ensure that the transmitter and receiver are located within the maximum range. The range will be affected if the device, for example, is located in a cabinet. Try to install the transmitter and receiver at a shorter distance.
  • Try setting another transmission frequency (channel) via the receiver.

The CHANNEL LED continues to flash blue.

  • Try setting another screen resolution on your HD device as this may not be supported. See technical data for the supported video resolutions.
  • Connect your HD device directly to the HDTV or HD Projector in order to set the correct resolution.
  • The LED flashes 3x per second and the screen of the HDTV or HD Projector shows 'No signal'.
  • Ensure that the HDMI cables used are connected properly and that they are not defective.
Need help?

NEED HELP?
WE ARE HERE TO HELP YOU!

If you have any questions about our products or our services, do not hesitate to contact our customer service. Our employees are ready to help you and answer your questions.