Always included
-
HDMI transmitter
-
HDMI receiver
-
HDMI cable | 150 cm
-
Mini USB to USB cable | 100 cm
-
Power adapter | 150 cm
Out of stock
1080p Full HD Wireless
Range - Single Room
Plug & play, no software
Currently not in stock
Product description
Extend your HDMI cable wirelessly
- Replace your HDMI cable and create a wireless connection between the laptop and TV or projector.
- Mount the receiver (invisibly) behind your TV or on the ceiling next to your projector.
- Also suitable for wireless transmission of HDMI image from devices such as Blu-ray players, Digital Video Recorders (DVRs) or HD set-top boxes.
- Turn your PC or laptop into a media center watch films, look at photographs, watch internet TV, YouTube or check e-mails wirelessly on your TV.
- No installation of software is necessary and it is quick and easy to use.
- Suitable for Full HD 1080p and all 3D formats.
- No loss of image or sound quality as the HD signal is being transmitted without compression.
- 100% HDCP compliant.
The GigaView 811 enables you to wirelessly connect a laptop to a projector/beamer without the need to install software. Ideal for use in a meeting room or a classroom. All you need is a projector with an HDMI input, a laptop with an HDMI output and this GigaView 811.
The GigaView 811 transmits the signal of the laptop (or another HDMI device) wirelessly to the receiver that is connected to a projector/beamer. The GigaView 811 is Full HD and supports all 3D formats. Because the signal is transmitted digitally and without compression, the image and sound do no experience any delay or loss of quality.
Technical specifications
Reviews
Points of sale
Frequently asked questions
No sound and image.
- It may take up to 80 seconds before sound and image start functioning when starting up the transmitter and receiver.
- Ensure that the HDMI cables used are connected properly and that they are not defective.
- Select the right HDMI input on your HDTV or HD Projector; consult your user manual if necessary.
The POWER LED continues to flash blue.
- Ensure that the transmitter and receiver are located within the maximum range. The range will be affected if the device, for example, is located in a cabinet. Try to install the transmitter and receiver at a shorter distance.
- Try setting another transmission frequency (channel) via the receiver.
The CHANNEL LED continues to flash blue.
- Try setting another screen resolution on your HD device as this may not be supported. See technical data for the supported video resolutions.
- Connect your HD device directly to the HDTV or HD Projector in order to set the correct resolution.
- The LED flashes 3x per second and the screen of the HDTV or HD Projector shows 'No signal'.
- Ensure that the HDMI cables used are connected properly and that they are not defective.
Need help?
NEED HELP?
WE ARE HERE TO HELP YOU!
If you have any questions about our products or our services, do not hesitate to contact our customer service. Our employees are ready to help you and answer your questions.
