Invisible Control 2

Invisible Control 2
IR extender - 2 appl.
  • Invisible Control 2 - IR extender - Product Image | Marmitek
  • Invisible Control 2 - IR extender - Application drawing| Marmitek
  • Invisible Control 2 - IR extender - Connections Image | Marmitek
  • Invisible Control 2 - IR extender - Connections Drawing | Marmitek
  • Invisible Control 2 - IR extender - Set Content Image | Marmitek
  • Invisible Control 2 - IR extender - 3D Packshot Image | Marmitek
1 6

Always included

  • IR module

  • Extension cable with 2 emitter LEDs | 300 cm

  • Power adapter | 180 cm

  • User manual

Invisible Control 2
Invisible Control 2
IR extender - 2 appl.

In stock

€ 34,99
€ 34,99 € 34,99
(incl. VAT)
Title
With this IR extender, you can operate up to two audiovisual devices inside a closed cabinet, using your own remote control. The Invisible Control 2 consists of an IR module including an IR receiver and 2 IR emitter LEDs. You stick an emitter LED on each device you want to operate. This enables you to operate up to 2 devices inside a closed cabinet, using your own remote control. The IR module is a small box that you place in the line of sight.

Control 2 AV devices

IR emitter LEDs

Tabletop IR receiver

Receive a 25% discount on the accessory below

25% discount on this accessory(s)
€ 42,98
Total amount of this bundle € 40,98
View full details
Invisible Control 2 - IR extender - Product Image | Marmitek
Invisible Control 2
€ 34,99
Complete your order
Invisible Control 2 - IR extender - Product Image | Marmitek
Invisible Control 2
Invisible Control 2
IR extender - 2 appl.

€ 34,99

Often bought together with Invisible Control 2

Product description

Operate up to 2 devices inside a closed cabinet, using your own remote control.

  • Intended to operate up to 2 devices inside a closed (TV) cabinet, using your own remote control.
  • Suitable for virtually all audio visual devices such as decoders, media boxes, Blu-ray players, hi-fi receivers and tuners.
  • Basic model in silver casing.

The Invisible Control 2 is an entry-level infrared extender that allows you to operate up to 2 audio visual devices.


You place the receiver (a little black box) within your remote control's line of sight, having it connected to the transmitter(s) you stuck to your audio visual devices. Your remote control's signal is sent to the transmitter(s) via the receiver. The transmitter then 'operates' your audio visual equipment. This ensures that you do not have to open any cabinet doors in order to operate your equipment.



Technical specifications

Translation missing: en.products.product.tech_specs.ir emitter
IR emitter (adhesive) LEDs 300 cm (from plug to splice 200 cm, from splice to LED 100 cm) with 3.5 mm jack plug
Translation missing: en.products.product.tech_specs.ir module incl ir receiver
Infrared output 2x 3.5 mm jack connection (mono) for emitter LEDs
Frequency range 30 - 60 kHz
Infrared reception range ± 8 metres
Infrared reception angle 60° (+30°/- 30° from center)
Dimensions (H x W x D) 30 x 90 x 75 mm
Power supply 100-240 VAC 50/60 Hz, 12 VDC adapter

Downloads

User manual
Product leaflet
Compare our infrared extenders

Rezensionen

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Points of sale

Frequently asked questions

Can I place the IR LED in the centre of the infrared eye?

The IR LED is made of a material which lets the infrared light through. You can place the LED in the centre of the eye without any problems.

Can I extend the cable with the IR (infrared) LEDs?

No, that is not a good idea. The signal becomes too weak. The warranty also expires.

Can I remove one of the IR (infrared) LEDs if I don’t use it?

Do not remove any of the IR LEDs. You can, however, attach the unused IR LED to the bottom or back of the device.

How many devices can I control with the Invisible Control 2?

The Invisible Control 2 is equipped with two transmitter LEDs, for a maximum of two devices, but can be extended by adding another cable with two transmitter LEDs (IR Eye 2, 08174), so that you can control four devices via IR.

If I use the mains adapter, do I also have to place a battery in the Invisible Control 2?

No, when you are using the mains, you do not need a battery. The Invisible Control Black 2 will also not go on stand-by.

Can I use the Invisible Control 2 near a flatscreen TV?

The Invisible Control 2 must not be allowed to react to the light emitted by the screen. It's easy to test whether or not this is the case. The Invisible Control has 'blinking' LEDs that flash on and off when transmitting. If you hold the Invisible Control in front of the screen, the LEDs will flash red. If you take the Invisible Control away from the screen, the LEDs will switch off. Once the LEDs are off, you have found the correct position to prevent interference.
Need help?

NEED HELP?
WE ARE HERE TO HELP YOU!

If you have any questions about our products or our services, do not hesitate to contact our customer service. Our employees are ready to help you and answer your questions.

TO CUSTOMER SERVICE