Always included
- IR transmitter
- IR receiver
- 2x power adapter
- User manual
Powermid XL
IR extender - Wireless
This wireless IR extender is suitable to use to operate equipment in another room or when you use a wall mount for your TV. Hang a TV freely and place the equipment you want to operate elsewhere. The Powermid XL consi... read more
€ 49,99
In stock
Control 8+ AV devices
Wireless IR extension up to 25m
Control AV devices in another room
Yes! Free Shipping!
Estimated delivery: 20 may - 25 may
Couldn't load pickup availability
Complete your set with the items below
€ 79,98
Powermid XL
IR extender - Wireless
Control 8+ AV devices
Wireless IR extension up to 25m
Control AV devices in another room
€ 49,99
EU
Product description
Operate audio video devices in another room
- Wireless solution to extend the signal from your remote control through walls and floors.
- Operate an HDD recorder, set-top box, satellite decoder or stereo system from other rooms in the home, for example, from the bedroom.
- Works with your own remote controls.
- Works on mains power.
- Can be used immediately, without installation.
- Operation guaranteed with all digital TV decoders.
The Powermid XL is our oldest success story. This wireless infrared extender is suitable for operating equipment in another room or if you are using a wall bracket for your TV. You can then hang your TV anywhere and place the equipment you want to operate elsewhere.
Technical specifications
IR emitter
Infrared output
1x 3.5 mm jack connection (mono) for emitter LEDs
Infrared transmission range
± 8 meters
Size
200 x 75 x 80 mm (with unfolded antenna)
Power supply
100- 240 VAC 50/60 Hz, 9 VDC
IR receiver
Frequency range
30 - 60 kHz
RF frequency
433.92 MHz
RF range
Up to 100 meters free field, up to 25 meters through floors and walls
Infrared reception range
± 8 meters
Infrared reception angle
60° (+30°/-30° from center)
Dimensions (H x W x D)
200 x 75 x 80 mm (with antenna extended)
Power supply
100-240 VAC 50/60 Hz, 9 VDC
Reviews
What customers say
Frequently asked questions
-
Does the signal of the Powermid XL travel through walls and ceilings?
Yes. The Powermid XL uses RF signals with a transmission frequency of 433 MHz. These signals go through walls and ceilings. -
What is the range of the Powermid XL?
The range of the Powermid XL depends on the local situation. The number of walls and ceilings, and their construction, influence the distance the signal can travel. Normally the range is between 10 and 20 m. -
Can I also use the Powermid XL to control equipment in a locked cupboard?
Yes. You will find an extra connection (3.5 mm plug) on the back of the Powermid XL receiver. This can be used to connect an IR Eye, which you can use to control equipment in a locked cupboard. -
How do I check whether the Powermid XL transmits the signal of my remote control?
When transmitting the signal of your remote control, a red LED will light up on both the transmitter and the receiver. -
Can I transmit signals from my wireless keyboard using the Powermid XL?
If your wireless keyboard uses standard infrared signals (40 kHz), you can extend this wireless signal. Contact the supplier of the wireless keyboard to check whether your keyboard uses this frequency. -
Does the Powermid XL also work with Bang & Olufsen equipment?
No. Bang & Olufsen uses a different infrared frequency. The Powermid XL does not support this frequency. -
Is it possible to use several IR transmitters with each other?
Yes, however, the IR transmitters will all transmit the same IR signal, which is received by the IR receiver.
Can't figure it out?
Related products
Invisible Control 6 XTRA
Operate an unlimited number of devices inside a closed cabinet, using your own remote control.
Operate an unlimited number of devices inside 1 or 2 compartments of a closed (TV) cabinet. Almost invisible to place, with operation guaranteed.
With the exception of the tiny infrared receiver, the complete set can be placed completely out of sight.
Very simple and quick installation through innovative infrared technology (infrared blaster LED).
Place the infrared blaster LED anywhere you want inside the (TV) cabinet and you can operate all audio visual devices in this compartment.
Works with virtually all brands and models and is suitable for new infrared code formats (such as RC-MM), which are used in many new HD devices and digital TV decoders.
Due to advanced filtering techniques, impervious to use near flat screen TVs (LCD, LED) and with indirect sunlight.
The Invisible Control 6 XTRA is the most frequently sold infrared extender. This virtually invisible infrared extender works with all equipment* and is very easy to install thanks to the two supplied infrared blasters.You place the receiver within your remote control's line of sight, having it connected to the module you placed inside the cabinet. You then connect the transmitter to the module. Your remote control's signal is transmitted via the receiver to the module, which returns the signal to the transmitter. The transmitter then 'operates' your audio visual equipment. This ensures that you do not have to open any cabinet doors in order to operate your equipment.* Equipment that is controlled with infrared. For example, Bang & Olufsen devices cannot be operated with infrared extenders.Compare all our infrared extenders
€ 49,99
Invisible Control Black 4
Operate up to 4 devices inside a closed cabinet, using your own remote control.
Intended to operate up to 4 devices inside a closed (TV) cabinet, using your own remote control.
Suitable for virtually all audio visual devices such as decoders, media boxes, Blu-ray players, hi-fi receivers and tuners.
Due to advanced filtering techniques, impervious to use near flat screen TVs (LCD, LED) and with indirect sunlight.
Works on 4 AAA batteries (not included) or on mains power (adapter included).
The Invisible Control Black 4 is an entry-level infrared extender that allows you to operate up to 4 audio visual devices.By default, this infrared extender consists of a:- Infrared module including a receiver: ‘receiver’ - Infrared transmitter: ‘transmitter’ (emitter LED)You place the receiver (a little black box) within your remote control's line of sight, having it connected to the transmitter(s) you stuck to your audio visual devices. Your remote control's signal is sent to the transmitter(s) via the receiver. The transmitter then 'operates' your audio visual equipment. This ensures that you do not have to open any cabinet doors in order to operate your equipment.Compare all our infrared extenders
€ 24,99
Invisible Control 2
Operate up to 2 devices inside a closed cabinet, using your own remote control.
Intended to operate up to 2 devices inside a closed (TV) cabinet, using your own remote control.
Suitable for virtually all audio visual devices such as decoders, media boxes, Blu-ray players, hi-fi receivers and tuners.
Basic model in silver casing.
The Invisible Control 2 is an entry-level infrared extender that allows you to operate up to 2 audio visual devices.You place the receiver (a little black box) within your remote control's line of sight, having it connected to the transmitter(s) you stuck to your audio visual devices. Your remote control's signal is sent to the transmitter(s) via the receiver. The transmitter then 'operates' your audio visual equipment. This ensures that you do not have to open any cabinet doors in order to operate your equipment.Compare all our infrared extenders
€ 19,99
IR Control 10
Use your own remote control to operate up to 4 devices from a large distance.
Professional set to operate up to 4 (max. 8 if an additional IR emitter expansion set is purchased) AV devices inside TV furniture or a cabinet, even from a large distance, using your current remote control.
Due to advanced filtering techniques, impervious to use near flat screen TVs (LCD, LED) and with indirect sunlight.
Works with virtually all brands and models and is suitable for new infrared code formats (such as RC-MM), which are used in many new HD devices and digital TV decoders.
The IR Control 10 enables you to operate 4 devices immediately.
Use the Marmitek IRC EM 2 or IRC BL 1, an infrared extension cable, to connect 4 more devices.
With the exception of the tiny infrared receiver, the complete set can be placed out of sight.
The IR Control 10 is our entry-level model for extending infrared signals over a distance of up to 300 metres. The IR Control 10 is almost identical to the IR Control 10 XTRA. Besides emitter LEDs, the latter also has a blaster LED, ensuring it can operate an unlimited number of devices. You place the receiver within your remote control's line of sight, having it connected to the module you placed inside the cabinet. You then connect the transmitter to the module. Your remote control's signal is transmitted via the receiver to the module, which returns the signal to the transmitter. The transmitter then ‘operates' your audio visual equipment. This ensures that you can control equipment over long distances.Compare all our infrared extenders
€ 89,99
IR Control 10 XTRA
Use your own remote control to operate an unlimited number of devices from a large distance.
Professional set to operate an unlimited number of AV devices inside TV furniture or a cabinet, even over a long distance, using your current remote control.
With the exception of the tiny infrared receiver, the complete set can be placed completely out of sight.
With infrared blaster feature to operate multiple devices directly, without searching for the infrared eyes on your equipment.
Works with virtually all brands and models and is suitable for new infrared code formats (such as RC-MM), which are used in many new HD devices and digital TV decoders.
Due to advanced filtering techniques, impervious to use near flat screen TVs (LCD, LED) and with indirect sunlight.
The IR Control 10 XTRA is one of our most advanced models. Extending infrared signals over long distances is not a problem. Using your existing remote control and a UTP cable, this infrared extender enables you to operate a decoder that is placed up to 300 metres away. You place the receiver within your remote control's line of sight, having it connected to the module you placed inside the cabinet. You then connect the transmitter to the module. Your remote control's signal is transmitted via the receiver to the module, which returns the signal to the transmitter. The transmitter then 'operates' your audio visual equipment. This ensures that you can operate equipment over long distances.Compare all our infrared extenders
€ 99,99
IR 100 USB
Attach equipment to rear of TV and operate it using the IR100USB.
Enjoy undisturbed ease of operation, without your AV devices being visible.
With the exception of the tiny infrared receiver, the complete set can be placed completely out of sight.
Very simple and quick installation due to innovative infrared technology (infrared blaster LED). Enables you to operate all AV equipment inside the same compartment.
Works with virtually all brands and models and is suitable for new infrared code formats (such as RC-MM), which are used in many new HD devices and digital TV decoders.
No power adapter needed.
Operate the Apple TV that is mounted behind your TV.
The IR 100 USB is a very compact infrared extender, which consists of only one transmitter and one receiver.The IR 100 USB is ideal to hide away your Apple TV behind your TV while it remains operable.Compare all our infrared extenders
€ 29,99
A member of the
group
group
- Choosing a selection results in a full page refresh.
- Opens in a new window.